MASTRAİLER TANKER
Đại lý đã xác minh
Trong kho:
35 quảng cáo
3 năm tại Autoline
Số điện thoại đã được kiểm tra
Sơ mi rơ moóc bồn chứa Mas Trailer Tanker 2024 Adr aliminum luxury model mới
PDF
Chia sẻ
Facebook
WhatsApp
Viber
Telegram
Quan tâm đến quảng cáo?
1/21
PDF
Chia sẻ
Facebook
WhatsApp
Viber
Telegram
Giá:
yêu cầu
Hỏi về giá
Liên hệ với người bán
Thương hiệu:
Mas Trailer Tanker
Mẫu:
2024 Adr aliminum luxury model
Loại:
sơ mi rơ moóc bồn chứa
Thể tích:
30000 1
Khả năng chịu tải:
25500 kg
Khối lượng tịnh:
5400 kg
Tổng trọng lượng:
30900 kg
Địa điểm:
Thổ Nhĩ Kỳ KARATAY / KONYA
Đặt vào:
9 thg 6, 2024
Autoline ID:
VE37753
Mô tả
Chiều cao bánh xe thứ năm:
1250 mm
Các kích thước tổng thể:
10850 m × 2550 m × 3750 m
Khung
Khung xe:
thép
Hộp đựng dụng cụ sửa chữa:
Giá gắn bánh xe dự phòng:
Bồn
Nhôm:
Sàn nâng:
Số lượng cửa nạp:
2
Kiểm tra áp suất:
0.4 bar
Số phần:
1
Độ dày của thành bồn:
5.28 mm
Độ dày của thành phía sau:
5.28 mm
Độ dày của thành vách ngăn:
5.28 mm
Trục
Thương hiệu:
SAF
Số trục:
3
Ngừng:
không khí/không khí
Chiều dài cơ sở:
1310 mm
Kích thước lốp:
385/65/r22,5
Phanh:
đĩa
Phanh
EBS:
Thiết bị bổ sung
ADR:
6.2, 8, 9
Dịch vụ giao xe
Tình trạng
Tình trạng:
mới
Thêm chi tiết
Màu sắc:
trắng
Quan trọng
Chào giá này chỉ mang tính hướng dẫn. Vui lòng yêu cầu thêm thông tin chính xác từ người bán.
Các bí quyết mua hàng
Thông tin liên hệ của người bán
Đăng ký với người bán
Export Sales
Ngôn ngữ:
Tiếng Thổ Nhĩ Kỳ, Tiếng Anh
+90 542 312...
Hiển thị
+90 542 312 86 28
Địa chỉ
Thổ Nhĩ Kỳ, 42050 BÜ, KARATAY / KONYA, FEVZİÇAKMAK MAH. 10662. SK. NO: 19 D
Thời gian địa phương của người bán:
10:03 (+03)
Gửi tin nhắn
Thông tin liên hệ của người bán
MASTRAİLER TANKER
Thổ Nhĩ Kỳ
3 năm tại Autoline
4.9
43 đánh giá
Đăng ký với người bán
+90 542 312...
Hiển thị
+90 542 312 86 28
Hỏi người bán
PDF
Chia sẻ
Facebook
WhatsApp
Viber
Telegram
Bán máy móc hoặc phương tiện?
Bạn có thể làm điều này với chúng tôi!
Các quảng cáo tương tự
Liên hệ với người bán
31.500 €
USD
VND
≈ 33.720 US$
≈ 859.600.000 ₫
Thể tích
30000 1
Ngừng
không khí/không khí
Chiều cao bánh xe thứ năm
1250 mm
Năm
Tổng số dặm đã đi được
Dung tải.
25500 kg
Thổ Nhĩ Kỳ, KARATAY / KONYA
Liên hệ với người bán
80.000 €
USD
VND
≈ 85.640 US$
≈ 2.183.000.000 ₫
Thể tích
30000 1
Ngừng
không khí/không khí
Chiều cao bánh xe thứ năm
1250 mm
Năm
Tổng số dặm đã đi được
Dung tải.
25500 kg
Thổ Nhĩ Kỳ, KARATAY / KONYA
Liên hệ với người bán
60.000 €
USD
VND
≈ 64.230 US$
≈ 1.637.000.000 ₫
Thể tích
30000 1
Ngừng
không khí/không khí
Chiều cao bánh xe thứ năm
1250 mm
Năm
Tổng số dặm đã đi được
Dung tải.
25500 kg
Thổ Nhĩ Kỳ, KARATAY / KONYA
Liên hệ với người bán
yêu cầu báo giá
Thể tích
30000 1
Ngừng
không khí/không khí
Chiều cao bánh xe thứ năm
1250 mm
Năm
Tổng số dặm đã đi được
Dung tải.
25500 kg
Thổ Nhĩ Kỳ, KARATAY / KONYA
Liên hệ với người bán
71.500 €
USD
VND
≈ 76.540 US$
≈ 1.951.000.000 ₫
Thể tích
30000 1
Ngừng
không khí/không khí
Chiều cao bánh xe thứ năm
1250 mm
Năm
Tổng số dặm đã đi được
Dung tải.
25500 kg
Thổ Nhĩ Kỳ, KARATAY / KONYA
Liên hệ với người bán
yêu cầu báo giá
Thể tích
30000 1
Ngừng
không khí/không khí
Chiều cao bánh xe thứ năm
1250 mm
Năm
Tổng số dặm đã đi được
Dung tải.
25500 kg
Thổ Nhĩ Kỳ, KARATAY / KONYA
Liên hệ với người bán
yêu cầu báo giá
Thể tích
30000 1
Ngừng
không khí/không khí
Chiều cao bánh xe thứ năm
1250 mm
Năm
Tổng số dặm đã đi được
Dung tải.
25500 kg
Thổ Nhĩ Kỳ, KARATAY / KONYA
Liên hệ với người bán
yêu cầu báo giá
Thể tích
30000 1
Ngừng
không khí/không khí
Chiều cao bánh xe thứ năm
1250 mm
Năm
Tổng số dặm đã đi được
Dung tải.
25500 kg
Thổ Nhĩ Kỳ, KARATAY / KONYA
Liên hệ với người bán
33.500 €
USD
VND
≈ 35.860 US$
≈ 914.100.000 ₫
Thể tích
30000 1
Ngừng
không khí/không khí
Chiều cao bánh xe thứ năm
1250 mm
Năm
Tổng số dặm đã đi được
Dung tải.
25500 kg
Thổ Nhĩ Kỳ, KARATAY / KONYA
Liên hệ với người bán
yêu cầu báo giá
Thể tích
30000 1
Ngừng
không khí/không khí
Chiều cao bánh xe thứ năm
1250 mm
Năm
Tổng số dặm đã đi được
Dung tải.
25500 kg
Thổ Nhĩ Kỳ, KARATAY / KONYA
Liên hệ với người bán
55.000 €
USD
VND
≈ 58.880 US$
≈ 1.501.000.000 ₫
Thể tích
30000 1
Ngừng
không khí/không khí
Chiều cao bánh xe thứ năm
1250 mm
Năm
Tổng số dặm đã đi được
Dung tải.
25500 kg
Thổ Nhĩ Kỳ, KARATAY / KONYA
Liên hệ với người bán
40.000 €
USD
VND
≈ 42.820 US$
≈ 1.091.000.000 ₫
Thể tích
30000 1
Ngừng
không khí/không khí
Chiều cao bánh xe thứ năm
1250 mm
Năm
Tổng số dặm đã đi được
Dung tải.
25500 kg
Thổ Nhĩ Kỳ, KARATAY / KONYA
Liên hệ với người bán
yêu cầu báo giá
Thể tích
30000 1
Ngừng
không khí/không khí
Chiều cao bánh xe thứ năm
1250 mm
Năm
Tổng số dặm đã đi được
Dung tải.
25500 kg
Thổ Nhĩ Kỳ, KARATAY / KONYA
Liên hệ với người bán
90.000 €
USD
VND
≈ 96.340 US$
≈ 2.456.000.000 ₫
Thể tích
30000 1
Ngừng
không khí/không khí
Chiều cao bánh xe thứ năm
1250 mm
Năm
Tổng số dặm đã đi được
Dung tải.
25500 kg
Thổ Nhĩ Kỳ, KARATAY / KONYA
ALUMINUM TANKER
DIMENSIONS:
Length: 10850 mm
Width: 2550 mm maximum
Height: 3750 mm
Pin - Ground clearance: 1250 mm
CHASSIS AND STRUCTURE:
Chassis: Carbon steel 100x200x5mm box section
Tanker Structure Monoblock
1 & 6 Compartments
Tank capacity between 30,000 lt & 45,000 lt
5.28mm aluminum alloy sheet
Tanker with ADR
Axles
3 BPW or Saf brand axles are used, each with a load capacity of 12 tons.
Air suspension.
The front axle is lifted and can be controlled from the cab.
BRAKE SYSTEM:
Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed.
ELECTRICAL SYSTEM:
Aspöck lighting system and Aspöck bumper
2x7 pin sockets - 24V, lights according to SAE standards.
Rear lights, side marker lights, brake safety warning lights and signal lights are installed.
2 tail and stop combination lights.
2 turn signal combination lamps are installed.
1 license plate light.
The electrical system complies with European standards and is flame retardant.
PARKING LEGS
OMS brand parking legs
Including telescopic mechanical conveyor
Dynamic lifting capacity : 25 tons
Static lifting capacity : 50 T
TIRES AND RIMS:
385/65/R22.5 STARMAX PETLAS, (6 pieces)
11.75 x 22.5, JANTSA rim (6 pcs)
KING-PIN:
Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate.
PAINTING:
All parts are carefully cleaned before painting.
First protective primer and epoxy is used for painting.
Two coats of high quality paint are applied to the tanker.
The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be considered as an extra cost.
EMCO WHEATON or CİVACON manhole cover:
It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. Standard ports are provided to mount the vapor recycling valve, level sensor, measuring rod, and vent. The center-opening manual lid has a diameter of 250 mm.
EMCO WHEATON or CİVACON pneumatic control unit
It is installed inside the tank truck cabinet. The air system, which is drawn from the vehicle's air cylinders, is connected to the inlet of the control unit. There are separate buttons for each eye and a clock indicating the air pressure, and it allows the system to operate during the filling and emptying of the tank.
EMCO WHEATON or CIVACON submersible valve:
3" standard bottom valve is connected to the bottom of the tanker separately for each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank with the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminium (eteal 171), the gaskets, the Viton spring and the fasteners (inox) are made of chrome nickel and pressure and leak tests have been carried out.
EMCO WHEATON or CİVACON-Api valve:
It is mounted inside the cabinet, each compartment is separate in the tanker. It is used for filling and emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been made.
ACCESSORIES
6 pieces of mudguards
1 wheel chock
1 6 kg fire extinguisher box
1 spare wheel space
1 water tank 30 lt.
1 Folding ladder
Holder for two 3.5 m drain hoses
Note: Please contact us for your production requests in special sizes.
ALUMINUM TANKER
DIMENSIONS:
Length: 10850 mm
Width: 2550 mm maximum
Height: 3750 mm
Pin - Ground clearance: 1250 mm
CHASSIS AND STRUCTURE:
Chassis: Carbon steel 100x200x5mm box section
Tanker Structure Monoblock
1 & 6 Compartments
Tank capacity between 30,000 lt & 45,000 lt
5.28mm aluminum alloy sheet
Tanker with ADR
Axles
3 BPW or Saf brand axles are used, each with a load capacity of 12 tons.
Air suspension.
The front axle is lifted and can be controlled from the cab.
BRAKE SYSTEM:
Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed.
ELECTRICAL SYSTEM:
Aspöck lighting system and Aspöck bumper
2x7 pin sockets - 24V, lights according to SAE standards.
Rear lights, side marker lights, brake safety warning lights and signal lights are installed.
2 tail and stop combination lights.
2 turn signal combination lamps are installed.
1 license plate light.
The electrical system complies with European standards and is flame retardant.
PARKING LEGS
OMS brand parking legs
Including telescopic mechanical conveyor
Dynamic lifting capacity : 25 tons
Static lifting capacity : 50 T
TIRES AND RIMS:
385/65/R22.5 STARMAX PETLAS, (6 pieces)
11.75 x 22.5, JANTSA rim (6 pcs)
KING-PIN:
Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate.
PAINTING:
All parts are carefully cleaned before painting.
First protective primer and epoxy is used for painting.
Two coats of high quality paint are applied to the tanker.
The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be considered as an extra cost.
EMCO WHEATON or CİVACON manhole cover:
It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. Standard ports are provided to mount the vapor recycling valve, level sensor, measuring rod, and vent. The center-opening manual lid has a diameter of 250 mm.
EMCO WHEATON or CİVACON pneumatic control unit
It is installed inside the tank truck cabinet. The air system, which is drawn from the vehicle's air cylinders, is connected to the inlet of the control unit. There are separate buttons for each eye and a clock indicating the air pressure, and it allows the system to operate during the filling and emptying of the tank.
EMCO WHEATON or CIVACON submersible valve:
3" standard bottom valve is connected to the bottom of the tanker separately for each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank with the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminium (eteal 171), the gaskets, the Viton spring and the fasteners (inox) are made of chrome nickel and pressure and leak tests have been carried out.
EMCO WHEATON or CİVACON-Api valve:
It is mounted inside the cabinet, each compartment is separate in the tanker. It is used for filling and emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been made.
ACCESSORIES
6 pieces of mudguards
1 wheel chock
1 6 kg fire extinguisher box
1 spare wheel space
1 water tank 30 lt.
1 Folding ladder
Holder for two 3.5 m drain hoses
Note: Please contact us for your production requests in special sizes.